AI Hardware Toolchain
Two tools Arwic built and uses on every hardware job. One lets Claude design electronics in KiCad, from schematic to factory order. The other lets it design the enclosure around that board and send it to the 3D printer. An engineer directs the work and approves each stage.
163 tools
for electronics and enclosure design
Electronics design
131 tools cover part search, schematic capture, electrical rule checks, board placement, routing, design rule checks and manufacturing files. Parts are checked against live supplier stock and prices, and the board is checked for factory assembly before an order is prepared.

Schematic drawn by the toolchain for the test board.
A board in 213 steps
As a test, the toolchain built an ESP32-C3 breakout board from an empty folder: 213 tool calls, 23 nets routed, 286 track segments, 38 vias, zero electrical errors and zero design-rule errors. The tool calls took 23.6 seconds in total, and routing took 3.9 of them. A real 4-layer board with 96 pads routes in about 3 seconds.

Parts placed.

Routed, with zero design-rule errors.

3D view of the finished test board.
Enclosure design
32 tools import the finished board, model the enclosure in code, check for collisions with every component, check that each part can be printed, slice it and run the printer. Finished parts come with dimensioned renders and a 3D view the customer can turn in a browser.

An enclosure modelled around its board.

The same part, exploded.
Learned from real prints
Tolerances come from measurement, not defaults. Calibration parts were printed and measured with calipers, producing 17 written findings. Two examples: round holes print 0.28 mm small at 2.1 mm diameter, and the slicer silently drops walls thinner than 0.85 of the nozzle width. Those numbers are built into every new design.
Tested like software
The electronics tool has 437 automated tests and the mechanical tool has 173. When the design software or the AI model changes, the tests show what broke before a customer's design does.
Available to your team
The toolchain can be installed on your engineers' machines and tuned to your parts library, design rules and suppliers.
See the engineering-team offer